PASSIVE LOUDSPEAKERS LVR400 LOMBARDI 400 W RMS – Mid / High and Low Module System

€483.00 – €609.00 IVA esclusa

The Lombardi LVR400 is an innovative modular system of cluster bass reflex loudspeakers designed and built entirely in Italy directly by Lombardi Amplificazioni with first choice components.
The cabinet is made with three types of wood. The exterior is in poplar plywood which makes it very light and with a warm sound. The fixing panel of the loudspeakers is in Spruce, as the soundboard of the box must have excellent timbre. All the reinforcements are in Birch to give it strength.
The Lombardi LVR400 is made in 2 modules, Medium / High module and Low module. The modules interface with each other to reach a Linear spectrum at the highest levels.
The Mid / High module mounts an 8″ coaxial neodymium speaker with Kapton driver, while the Bass Moduo mounts an 8″ neodymium speaker.

Ideal in any situation where sound fidelity is essential, it is used for service from small to large events or for installations in clubs and theaters.

The loudspeaker system  modularity from 1 to 8 units (combined between Medium / High and Low modules), helps in service or fixed installation of any size and capacity to reach the best configuration needed. The extraordinary horizontal 70 ° and vertical 70 ° dispersion which makes it unique in the sector.
Lombardi LVR400 loudspeakers must be driven in mono-amplification with a 400 watt RMS amplifier into 8 ohms.
The strength of the product is its versatility, modularity, ease of use, light weight, very efficient and with the quality that distinguishes Lombardi Amplifications products. Really unbelievable.

Description

Lombardi LVR400 loudspeakers are passive and mono-amplified. They must be connected to an amplifier max 400W/500W RMS on 8 Ohm. Although very compact, is of high quality with an excellent power to size ratio ideal for use alone on a stand, which as a modular acoustic speaker Line Array creating vertical clusters.

LVR400 exploiting its modularity is made in 2 variants :

  • LVR400HP : Medium / High module
  • LVR400BP : Low module

The realization of two different modules while maintaining the same external cabinet allows the creation of Line Arrays composed by Medium / High and Low modules according to the acoustic necessity.

The speaker system is ideal in combination with the LS700P and LS1000P subwoofers.

Medium / High Module – LVR400HP:

2-way bass reflex speaker system
woofer n° 01 coaxial 200mm 2,5″ with compression horn and 1,7″ kapton diaphragm
frequency response 60-20000 Hz
passive crossover network 1500 Hz 12 dB/oct
cutoff frequency 1500 hz 12 dB/oct
Speaker Opening Horizontal 70°, Vertical 70°
power mono-amp:
– nominal 400w RMS
– max 500w RMS

nominal impedance 8 ohm woofer , 16 ohm driver
input and output connectors Speak-on © 4c
finish black polyurea paint
ready for installation:
– Line Array with Hardware
– on floor stand
– modular on upright with double seat for pole (top and bottom)

Handle rear handle for transport (accessory on request, required for hanging Line Array)
support rubber feet (accessory on request)
speaker protection metal grille 
dimensions cm [WxDxH]  36x35x24.7
weight kg 8

Bass Module – LVR400BP:

2-way bass reflex loudspeaker system
woofer n° 01 woofer 200mm 2,5″
frequency response 50-400 Hz
mono-amp :
– nominal 400w RMS
– max 500w RMS

nominal impedance 8 ohm
input and output connectors Speak-on © 4c
finish black polyurea paint
ready for installation:
– Line Array with Hardware
– on a stand
– modular on upright with double seat for pole (top and bottom)

Handle rear handle for transport (accessory on request, required for hanging Line Array)
support rubber feet (accessory on request)
speaker protection metal grille
dimensions cm [WxDxH] 36x35x24.7
weight kg 7,4

Additional information

Weight 10 kg
Dimensions 40 × 40 × 30 cm
Tipologia

LVR400HP modulo Medio / Alti, LVR400BP modulo Bassi
  • small-medium events amplification
  • line array acoustic speaker
  • Cluster acoustic speaker
  • front fill / side fill / drum fill amplification
  • audio and video cinema amplification system / surround system
  • music diffusion pubs / clubs / squares / theater of any size
  • discos
  • live music / playback / speech
  • Flying Bar for Line Array
  • Hardware for Line Array
  • Ball Lock for Line array
  • Rear handle (required for Line Array)
  • Joint for joining double recessed stand (up to 3 modules one above the other)