Channels section
- CHANNELS 1-2-3
- mono channel with left / right balance
- microphone / line input selector
- Balanced XLR microphone input
- Mono line input with unbalanced 6.3 jack
- 5-step equalization (12K Hz, 5K5 Hz, 1K Hz, 250K Hz, 60 Hz)
- 100Hz high pass filter with button and control led
- button with independent + 48v (phantom) power supply LED for each channel to power condenser microphones and DI boxes
- -20db attenuation selector that allows you to interface any equipment with any type of signal such as recorders, VCRs, cameras, radios, etc.
- Rotary potentiometer for volume adjustment
- Left and right balance rotary potentiometer
- There are also 2 auxiliary sends for connected effects (reverbs, delays, etc.) or monitors for secondary listening. Output 1 is PRE fader, overall mixer output 2 can be PRE or POST fader. Both have balanced outputs with XLR connectors
- Light switch with led on / off
- mono led indicator of peak and signal presence
- CHANNEL 4
- stereo channel with left / right balance
- microphone / line input selector
- Balanced XLR microphone input
- Stereo line input with 2 jacks 6,3 unbalanced (if you want to use it in mono, connect to the first Jack at the top)
- front stereo minijack input
- line / mic selector – minijack 3.5
- 3-cut equalization (12K Hz, 1K Hz, 60 Hz)
- Mono led switch
- button with independent + 48v (phantom) power supply LED for each channel to power condenser microphones and DI boxes
- -20db attenuation selector that allows you to interface any equipment with any type of signal such as recorders, VCRs, cameras, radios, etc.
- Rotary potentiometer for volume adjustment
- buttons for assignment Auxiliary 1, Auxiliary 2, left, right
- There are also 2 auxiliary sends for connected effects (reverbs, delays, etc.) or monitors for secondary listening. Output 1 is PRE fader, overall mixer output 2 can be PRE or POST fader. Both have balanced outputs with XLR connectors
- Light switch with led on / off
- stereo led indicators for peak and signal presence
- CHANNEL 5
- stereo channel with left / right balance
- microphone / line input selector
- Balanced XLR microphone input
- Stereo line input with 2 jacks 6,3 unbalanced (if you want to use it in mono, connect to the first Jack at the top)
- Bluetooth input
- line / mic selector – Bluetooth
- 3-cut equalization (12K Hz, 1K Hz, 60 Hz)
- Mono led switch
- button with independent + 48v (phantom) power supply LED for each channel to power condenser microphones and DI boxes
- -20db attenuation selector that allows you to interface any equipment with any type of signal such as recorders, VCRs, cameras, radios, etc.
- Rotary potentiometer for volume adjustment
- buttons for assignment Auxiliary 1, Auxiliary 2, left, right
- There are also 2 auxiliary sends for connected effects (reverbs, delays, etc.) or monitors for secondary listening. Output 1 is PRE fader, overall mixer output 2 can be PRE or POST fader. Both have balanced outputs with XLR connectors
- Light switch with led on / off
- stereo led indicators for peak and signal presence
Master Section
-
- ignition switch
- VU Level 13 indicator Left / Right room Stereo LED (switchable to Auxiliary 1 and Auxiliary 2)
- volume per recording output
- Volumes Auxiliary 1 and Auxiliary 2
- Auxiliary Pre / Post switch 2
- Auxiliary / Master Level VU Indicator Switch
- Left room and right room volumes
- Mono / Stereo general mixer switch
Output section
- Balanced left and right salt output stage with XLR connectors
- Balanced preamp outputs with XLR connectors
- Subwoofer output cut 145 Hz 12 dB oct. Pass Low
- Unbalanced recording output with RCA connectors and independent volume control
- Auxiliary 1 and Auxiliary 2 XLR balanced outputs (monitors 1 and 2)
- INSERT (6,3 stereo jack) to connect equalizers and limiters (ING – OUT SALE) in the Right and Left room
- Ground / Ground selector
- VDE power connector with spare fuse box and earth switch complete the mixer functions
Standard RACK size 3 units
dimensions cm [WidthxDepthxHeight] 48.5x39x13.2
weight kg 7,8