Channels section
- CHANNEL1
- balanced microphone input with channel volume adjustment (front input connector multi input in XLR or Jack)
- CHANNEL 2
- stereo channel with left / right balance
- 5-step multi-input selector:
- line 1 / Phono: line or Phono input selectable via internal jumper with RCA inputs
- line 2: line input with RCA inputs
- line 3: line input with RCA inputs
- line 4: line input with RCA inputs
- Bluetooth: Bluetooth input with power button (the LED flashes when there is no connection and the channel is on, the LED is steady when there is a connection between the peripherals)
- rotary potentiometer for channel Sensitivity adjustment
- 3 cut equalization (low, medium, high)
- Left and right balance rotary potentiometer
- Rotary potentiometer for input volume adjustment
- There are also 2 aux sends for connected effects (reverbs, delays, etc.) or monitors for secondary listening. Both have balanced outputs with XLR connectors
- stereo mono selector ref. Auxiliaries 1 +2
Master Section
-
- general volume rotary potentiometer
- VU Level 04 indicator Left / Right room Stereo LED
- Mono / Stereo general mixer switch
- rotary headphone volume potentiometer
- 6.3 mm headphone jack
Output section
- INSERT (6,3 stereo jack) to connect equalizers and limiters (ING – OUT SALE) in the Right and Left room
- Subwoofer output cut 145 Hz 12 dB oct. Pass Low
- Amplified output salt left and right with Speakon connectors (connection 1+ positive and 1- negative)
- max RMS output per channel: 125w into 8 ohms – 200w into 4 ohms – 75w into 16 ohms
- frequency response: 10Hz – 50 KHz
- bandwidth: 10Hz – 50 KHz
- protection: separate thermal each channel
- THD + N (harmonic distortion): < 0.01% from 20Hz to 20KHz
- dumping factor: above 500 from 20 Hz into 8 Ohms
- input sensitivity and impedance: .75 Volt on the entire output at 50 KOhm
- input impedance (balanced / unbalanced): >20 KOhm / >10 KOhm
- noise: -100 dB
- crosstalk: < noise from 20Hz to 10KHz
- class: AB
- transistor amplifier
- Auxiliary 1 and Auxiliary 2 XLR balanced outputs (monitors 1 and 2)
- Bluetooth antenna
- GND for phono
- cooling fan
- Auxiliary 1 and Auxiliary 2 inputs with XLR (direct input for other mixer)
- channel 2 inputs section:
- line 1 / Phono: line or Phono input selectable via internal jumper with RCA inputs
- line 2: line input with RCA inputs
- line 3: line input with RCA inputs
- line 4: line input with RCA inputs
Standard RACK dimensions 1 unit or without flaps resting on a shelf
support dimensions cm [WidthxProfxHeight] 43.5x39x4.5
rack size cm [WidthxProfxHeight] 48.5x39x4.5
weight kg 3.5